WE04X23220 Dryer Main Control Board

Similar products found in:
Dryer Parts   >   Dryer Control Boards
Dryer Parts   >   Dryer Uncategorized Parts

- Main Control Board
- Must be programmed after installation in order to work properly
- Installation instructions:
1. Put in Idle Mode - All LED's should be off on the display
2. Press the following key sequence to enter service mode:
- My Cycle - Delay Dry - My Cycle - Delay Dry
3. Once in service mode the control will show t1
4. Press the Start/Pause after t1 is displayed
5. Press and hold Temp & Level buttons at the same time for 3 seconds
6. Press the Level button to increase or press the Temp button to decrease the Model Code number selection until your model is shown.
7. Press the Start/Pause button to save the model code
8. Chose the heater type "g" for gas or "E" for electric
9. Press and hold the Start/Pause button for 3 seconds to set heater type
10. Dryer is now ready

Model Number User Interface Mode Type
GFMR295EF/GF 0
GFDS260EF/GF 1
GFDS265EF/GF 1
GFDR270EH/GH 1
GFDR275EH/GH 1
GHDS360EF/GF 2
GHDS365EF/GF 2
GFDR480EF/GF 3
GFDR485EF/GF 3